Anderson head lifter PIN size 99 r6

[trumpst]

I stupidly left the pin in stand on back of trailer as I drove home yesterday- Pin gone!!
Anyway, there are multiple sizes available- can anyone help me re diameter size of hole under the headstem? It looks around 20mm - Anderson's sell 19mm or 22mm. The one I lost was actually tapered too small anyway. (think it was around 15mm) 1999 r6.
Thanks

[Captain]

Bummer trumpst. I'm sure someone will know, if not these people probably will http://www.r6messagenet.com/forums/yamaha-yzf-r6/

[veitch-y]

Sharp fitment chart says 21 .

[trumpst]

Sharp fitment chart says 21 .
If that's the case- should I get 19mm? (only other option 22mm):confused:

[veitch-y]

If that's the case- should I get 19mm? (only other option 22mm):confused:

How is it fitted to stand ? If it is attached to stand the same way the Sharp one's are then you may be in luck ...... I think my old RGV one may have been the same so I should have one lying about here .

[trumpst]

How is it fitted to stand ? If it is attached to stand the same way the Sharp one's are then you may be in luck ...... I think my old RGV one may have been the same so I should have one lying about here .
It just slots in- the hole in the stand is approx 20mm diameter. The pins are not expensive- if I get one I'll have the guys at work machine a spare!

[veitch-y]

ok , the one I have slots in the hole and has a screw to hold it in , give me a yell if you need it .

[slow bro]

Kaneg ones on flebay........19mm 20mm 21mm.........Item number: 310217953286

[trumpst]

Thanks Veitch-y- Chris at Anderson is going to send me one and if not correct will be able to replace.
Slow Bro- presume the Kaneg ones are same fitting size on the stand as Anderson?
Thanks everyone for your replies- all good help.:ayyy:

[*Oggy*]

I stupidly left the pin in stand on back of trailer as I drove home yesterday- Pin gone!!
Anyway, there are multiple sizes available- can anyone help me re diameter size of hole under the headstem? It looks around 20mm - Anderson's sell 19mm or 22mm. The one I lost was actually tapered too small anyway. (think it was around 15mm) 1999 r6.
Thanks

Hey.. I might have it !!!

As we were packing up, Roy handed one to me that he picked up... As I took my spare for Nutsa to use and we have my back of different ends out, he (and I assumed it was one of mine ????

So I'm guessing it may be yours.....

[trumpst]

Hey.. I might have it !!!

As we were packing up, Roy handed one to me that he picked up... As I took my spare for Nutsa to use and we have my back of different ends out, he (and I assumed it was one of mine ????

So I'm guessing it may be yours.....
May well be- if it's not yours, keep it in your tool box and I'm sure we'll cross paths again sometime! Thanks

[*Oggy*]

I've only just loaded up the trailer before the rain came... So tomorrow lorning I'll go through the tool box.. If it was yours. I'll have two the same so easy to see.....

I'm at the creek June 8th CSS and 12th Ride day and might go down 14th for a nosey.... Ill let you kmow tomorrow and then maybe someone you know will be at the creek on one of them days !!!

[jasonbw]

My mate will be working those two days, he's a local (Wollongong), let me know Jeff if you'd like it brought back.

I have all the pins that come with the anderson under head stand, if everything turns out wrong you're welcome to use my assortment to find the right one, in fact if it's different to the GSXR and CBR ones which I often use then you're welcome to keep it.

Big thumbs up to Anderson, sounds like great customer service! :ayyy:

[trumpst]

Having tried to measure the hole with a tape, I just realised that I should use a socket , then measure that to get the correct size! (Yes, I am slow, thanks:rolleyes:) I now know it won't fit a 22mm but 19 and maybe 20mm good. Will get new one from Anderson then, if mine with Oggy, I can have a spare.-
Let me know, Oggy, if you think it's mine. Maybe Jason's mate might bring it to him. (Also, Jason, do you still have a tyre changer? Might organise to drop up and bring some wheels/tyres sometime- if so?)

[jasonbw]

I can definitely get Brendon to bring back the pin, but as for tyre changing I can't do that right now, renovations means I cant get access to the machine - it's under about 3 meters of furniture or bits!! :)

[*Oggy*]

Yep, My stand still has the pin in it that Nursa used on his 600RR and the one roy handed me is a duplicate of one of the ones in my box, so 100% your one.... Jason.. get your mate to find me , I've put it in the car console so I can't forget it....

[trumpst]

If the weather's fine, Oggy, I'll ride the trumpy up to EC to have a look see- it needs a ride as I've been away for 8 weeks. Hang on to it, please.
Thanks.